Champ Intelligent with Brightlayer lighting in application

Brightlayer Lighting control and insights

Intelligent lighting control and insight software that improves safety and reduces costs by optimizing your lighting system and eliminating the over-usage of lights. Provide the RIGHT amount of light, WHEN and WHERE you need it!

Request a demo

Reliable lighting is a critical aspect of industrial workplace safety and performance. Lighting systems must provide high visibility, while minimizing shadows and glare to help create a safe and productive work environment for your employees. Poor or inadequate lighting is a leading factor in workplace accidents and injuries.

In addition to safety challenges, lighting systems in harsh and hazardous applications face rising energy and maintenance costs due to the over-usage of lights. Running lights more than necessary, often due to a lack of effective control, shortens the life of the fixtures and drives up material and labor costs. Plus, slowing or stopping production to replace failed lighting impacts your productivity.

Brightlayer lighting helps mitigate these challenges

When connected to our Crouse-Hinds series Intelligent LED light fixtures, Brightlayer Lighting software enables wireless control and insight capabilities, delivering more operational value and better total cost of ownership.

Combining Brightlayer Lighting's intuitive app-based software interface with our advanced LED lighting design with communications and sensing technology, you can unlock full lighting control at your fingertips to help improve safety, maximize energy savings and minimize maintenance costs.

Minimize maintenance costs

Running lights more than necessary shortens the life of the fixtures and drives up material and labor costs. With Brightlayer lighting, you can optimize your system to help eliminate over-usage and double the life of your lighting fixtures.

Maximize energy savings and sustainability

Brightlayer lighting puts full lighting control at your fingertips with a range of intelligent features. You can easily tune your light output based on space and specific usage requirements. Optimizing your lighting system through intelligent control can help reduce your energy consumption by up to 50%.

Improve safety through monitoring

Brightlayer lighting and our intelligent luminaires monitor ambient light, temperature, motion, energy consumption, and overall fixture health. Any irregularities in these factors generate feedback alarms to your team, so you can take planned, proactive action and help maintain a safe, well-lit work environment.

Designed for simplicity

Brightlayer Lighting's intuitive commissioning and control provides effortless management of your Crouse-Hinds series intelligent lighting system. Unlike other ”connected” lighting solutions that use complex hardware and software, Brightlayer Lighting features a robust, easy to use mobile interface that connects to each Crouse-Hinds series fixture via Bluetooth low energy (BLE) technology.

All from your mobile device - no gateways or servers required!

Designed to simplify light fixture control
App-based configuration for effortless customization
Creates a connected infrastructure for future scalability

Intelligent lighting control reduces costs by optimizing your system and eliminating over-usage of lights

With Brightlayer Lighting and Crouse-Hinds series intelligent LED light fixtures, combinations of the control functions below can be utilized across your facility to optimize light levels by site and minimize your energy and maintenance costs.

Live fixture ID

Our intuitive app-based dashboard enables quick and easy identification of individual lights installed in the field. Simply select "live id" for a specific fixture and it will cycle on and off three times.

Device grouping

An added benefit that maximizes control in a defined area. By grouping light fixtures, the same control settings can be applied to them all, increasing efficiency and response time.

ON/OFF & dimming

Turn lights on and off wirelessly from the dashboard. Reduce energy consumption by setting dimming levels. Used in conjunction with other features, such as scheduling and occupancy sensing, to further improve energy savings.

Intelligent scheduling

Allows for improving energy efficiency during non-operational hours. Easy app-based configuration lets a user set up schedules for lights to be on and off at pre-defined times, removing the challenges of manual management.

Occupancy sensing

Ideal for areas that see infrequent traffic, such as storage areas or warehouses. Sensor controls can automatically illuminate the area once presence is sensed and also turn lights back off when presence is no longer sensed.

Daylight harvesting

Allows for use of the daylight and adjusts the light level of the luminaire to maintain desired light levels. It is best suited for outdoor environments or indoor areas where daylight is present during operational hours of a facility.

Provide the RIGHT amount of light, WHEN and WHERE you need it!

With Brightlayer Lighting's intuitive app-based interface, you can utilize combinations of the above control functions across your facility to optimize light levels by site, while minimizing run time to lower your energy and maintenance costs.

Champ Intelligent with Brightlayer Lighting use case example

Brightlayer Lighting Case Study

Learn how Brightlayer Lighting and Champ Intelligent LED light fixtures are helping BASF improve safety and efficiency at their firewater diesel storage area.

View Case Study

Brightlayer + Crouse-Hinds series

Unlock intelligent lighting control & insights that maximize safety, productivity & savings.

When paired with Crouse-Hinds series intelligent light fixtures, Brightlayer Lighting provides additional customized control with a wide range of intelligent features. Create lighting groups and set light levels that can be managed by schedule, available daylight, and occupancy. This helps ensure that the safest light levels are maintained, while minimizing energy consumption and eliminating the over-usage of lights.

In addition to customized lighting control, you can easily see each fixture’s estimated remaining usable life at a glance. Use this data to schedule planned maintenance events to avoid possible safety issues from failed lights and to minimize personnel time spent in the hazardous areas.

Learn more about our service plan levels

Brightlayer-ready LED light fixtures

Champ Intelligent VMVL M3 for QR landing page

Champ VMVL LED Intelligent Lighting for Hazardous Areas

The Crouse-Hinds series LED fixtures below can be set up with a Brightlayer Lighting subscription plan to reduce risk and improve safety, efficiency, resiliency and sustainability. Select a product family to view its design features, certifications, technical specificaitions and associated support documents.

Champ Intelligent PVML M3 for QR landing page

Champ Pro PVML LED Intelligent Lighting for Industrial Areas

To have your questions answered or to schedule a demo, contact us.

Ask a question

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power ─ today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we’re accelerating the planet’s transition to renewable energy and helping to solve the world’s most urgent power management challenges.

Brightlayer Lighting control and insights