Download document () of 20
Send email
Download
You have exceeded the download limit
LED controls enable the ability to dynamically change colour empowering the designer to create effects never seen or experienced before adding a whole new dimension in LED lighting.
As the colour is generated at source there is no need for filters which absorb the light.
| Colour Change Drivers - 24 Channel rack mount driver |
| 19 inch rack mounted driver system - 1U |
| High power density model - 672W output power |
| Drives up to 384 LEDs across 24 independent channels |
| Universal mains input 110V AC - 240V AC |
| Dynamic power control and pulse amplitude modulation |
| Backlit 16 x 2 LCD display menu system |
| 100mA to 1A LED forward current per channel in 50mA steps |
| 8-bit control with 8-bit master channel current resolution to prove up to 4 billion colours in 3 Channels |
| Wide output DC voltage range (1V to 48V DC) |
| Intelligent rack management system for easy rack plug and play system configuration |
| DMX or RDM protocol support |
| Multiple channel bonding to create high current outputs >6A |
| 8 individual temperature measurement sensor inputs for dynamic lighting fixture protection |
| Configures as 8 outputs of 3 channels or 6 outputs of 4 channels |
| 672W solution can drive up to 1000mA per channel; either 12 channels @ 48V DC or 24 channels @ 24V DC |
| Linear and smooth dimming selectable on each channel |
| As the DC voltage demand goes down, the maximum forward current can be pushed up |
| Real time LED current, voltage and status monitoring |
| Over 81,000 internal programme scene options |
| DMX Master/slave options |
| Takes standard S pin XLR connectors |
| Alternatively has an RJ4S connection in the back of the driver |
| User Control |
| Stand-alone operation |
| Intuitive setup and operation |
| Multi-lingual LCD information screen |
| Master brightness and speed control |
| Smooth digital dimming |
| Sound activation for light and sound synchronised effects |
| Built-in real-time astronomical clock |
| TCP/IP Ethernet connectivity |
| Twin full DMX 512 universes |
| Range of plate finishes available |
| Fits into a standard 47mm UK back box |
| Construction | |
| Mounting: | Standard 19” - 1U Rack System |
| Material: | Steel case |
| Weight: | 5 kg |
| Dimensions: | Main body - 435 x 370 x 44mm |
| Front panel - | 483 x 44mm |
| Input | |
| Input Voltage Range: | 110 - 240V AC |
| Input Frequency: | 50 - 60Hz |
| Consumption: 1 - 700W | |
| Power Factor: | 0.95/230V AC, 0.99/115V AC @ full |
| Efficiency: | >85% at full load input |
| Connection: | Standard IEC mains filter |
| Standby Power: | <1W total |
| Inrush Current: | 70A/115V AC, 140A/230V AC |
| Output | |
| Output Power: | 1 - 48W per channel, max 672W |
| Output Current: | 0 - 500mA @ 48V DC per channel |
| 0 - 1000mA @ 24V DC per channel | |
| Voltage Range: | 1 - 48V DC per channel |
| LED Connection: | 8 Pin terminal connectors |
| Thermistor Connection: | Pin terminal connectors |
| Control Input | |
| Dimming control: | DMX-512A or RDM |
| Connection: | 5 - Pin XLR |
| Dimming Range: | 0 - 100% |
| DMX Address Range: | 001 - 510 via Menu system |
| Programs: | See user manual for all pre-sets |
| Master / Slave Arrangement: | See user manual |
| Thermal Feedback Control: | Thermistor control - 4 options |
| Dimming Resolution: | 8-bit and Master Dim PAM |
| Environmental | |
| Operating Ambient Temperature: | 10ºC to + 50ºC |
| Storage Ambient Temperature: | -20ºC to + 70ºC |
| Case Temperature: | + 75ºC |
| Relative Humidity: | 80% |
| Protection | Over voltage, over temperature, overload, short circuit, open circuit, will withstand 300V AC surge input for 5 seconds |
| Cat No | Description |
| LS-CLMX-VAR-24 | 19” 1U 24 channel rack mount LED driver |
| Specification | |
| Power Supply: | 15V DC 0.3A, PSU supplied |
| DMX Outputs: | 2 x 512 channels, fully configurable |
| Ethernet: | 10/100 on RJ-45 socket |
| I/O: | Up to 3 Volt-free contact closure inputs |
| Up to 3 0-10V outputs | |
| User Interface: | RGB buttons, scroll wheel |
| Time Functions: | RTC + Astronomical clock built-in |
| LCD display: | 128 x 64 pixel mono graphic display, user configurable |
| Networking: | Web server built-in, library of telnet commands |
| Audio In: | Line-level beat triggering audio input. |
| Note audible converter maybe required, contact technical support for details | |
| Dimensions: | 146 x 87 x 35mm. 47mm deep standard |
| UK twin back-box recommended | |
| Weight: | 0.23kg |
| Cat No | Description |
| LS-CS512-SS | DMX wall mount controller with stainless steel fascia |
| LS-CS512-W | DMX wall mount controller with white fascia |
